GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Rendezvous - FWD 🢒 Body 🢒 Roof 🢒 Sunroof Sunshade Stop Replacement

Removal Procedure

    Object Number: 766635 Size: SH
  1. Remove the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  2. Remove the sunshade stop screw from the sunshade track.
  3. Press the sunshade stop locking tab in and slide the sunshade stop rearward.
  4. Remove the sunshade stop from the sunshade track.

Installation Procedure

    Object Number: 766635 Size: SH
  1. Position the sunshade stop to the sunshade track.
  2. Press the sunshade stop into the sunshade track until fully seated.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the sunshade stop screw to the sunshade track.

    4. Tighten
    Tighten the sunshade stop screw to 2 N·m (18 lb in).

  4. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.