The component location table shows a list of the locations of components in a system. The table consists of all components, grounds, pass-through grommets and splices within a system's electrical schematic(s).

The name cells provide the name of the component that is used on the schematic(s). Where connectors are listed, the number of cavities is also provided. This represents the total number of cavities in the connector, regardless of how many are actually used.

The location cells provide a written location with references to vehicle landmarks. Nearly every component, connector, ground or splice shown on a schematic can be pinpointed visually using component location views illustrations. The locator view and connector end view cells include the service category type number and the service category number that the view resides in.