Circuit Description
The outlet valve solenoid circuits are supplied with battery power when the ignition is in the ON position. The EBCM/EBTCM controls the valve functions by grounding the circuit when necessary.
Conditions for Setting the DTC
The EBCM/EBTCM senses a discrepancy in the circuit such as:
| • | An open. |
| • | A short to ground. |
| • | A short to voltage. |
Action Taken When the DTC Sets
| • | A malfunction DTC stores. |
| • | The ABS/TCS disables. |
| • | The ABS/TCS indicator(s) turn on. |
Conditions for Clearing the DTC
| • | Condition for DTC is no longer present and scan tool clear DTC function is used. |
| • | 100 ignition cycles have passed with no DTCs detected. |
Diagnostic Aids
The solenoid valve circuit and the solenoid coil are internal to the EBCM/EBTCM. No part of the solenoid circuit is diagnosable external to the EBCM/EBTCM. The DTC sets when there is a malfunction in the solenoid circuit internal to the EBCM/EBTCM only.
Test Description
The number below refer to step number on the Diagnostic Table.
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Diagnostic System Check performed? | -- | ||
Does DTC C1262 reset as a current DTC? | -- | |||
3 | Replace the EBCM/EBTCM. Refer to Electronic Brake Control Module/Electronic Brake and Track Control Module Replacement . Is the repair complete? | -- | -- |
