Tools Required

J 37043 Parking Brake Cable Release Tool

1. Remove the left side instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
2. Remove the left side carpet retainers. Refer to Carpet Retainer Replacement in Interior trim.
3. Disconnect the electrical connector at the parking brake indicator switch (1).



4. Remove the mounting nuts from the parking brake pedal.
5. Remove the parking brake pedal with the parking brake cable.



6. Remove the cable button end from the lever clevis.
7. Remove the cable from the lever using the J 37043 .
8. Remove the parking brake indicator switch. Refer to Parking Brake Indicator Switch Replacement .

1. Install the parking brake indicator switch. Refer to Parking Brake Indicator Switch Replacement in this section.
2. Install the parking brake cable to the parking brake pedal.
3. Install the cable end onto the pedal clevis.



4. Install the parking brake pedal.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

5. Install the parking brake pedal mounting bolts.

Tighten
Tighten the parking brake lever mounting nuts to 25 N·m (18 lb ft).




6. Connect the electrical connector at the parking brake indicator switch (1).
7. Adjust the parking brake. Refer to Park Brake Cable Service/Adjustment .
8. Install the left side carpet retainers. Refer to Carpet Retainer Replacement In Interior trim.
9. Install the left side instrument panel insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.