Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Exterior Lights Schematics | |||
1 | Did you perform the Lighting System Diagnostic System Check? | Go to Step 2 | |
2 |
Are any of the turn signals illuminated? | Go to Step 4 | Go to Step 3 |
3 | Place the turn signal switch in the RH On position and LH On position. Do the turn signals operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 7 |
4 | Are the turn signal lamps flashing? | Go to Step 8 | Go to Step 5 |
5 | Disconnect the turn signal switch. Are the turn signals illuminated? | Go to Step 6 | Go to Step 8 |
6 | Repair a short to voltage in the affected turn signal supply voltage circuit . Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 9 | -- |
7 | If the corresponding turn signal illuminates but does not flash when the turn signal switch is ON, replace the hazard lamp/turn signal flasher. Refer to Hazard and Turn Signal Flasher Replacement . Did you complete the repair? | Go to Step 9 | -- |
8 | Replace the turn signal switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the replacement? | Go to Step 9 | -- |
9 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 2 |
