Schematic Reference: Exterior Lights Schematics

Did you perform the Lighting System Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Turn the ignition switch to the RUN position.
2. Place the turn signal switch in the OFF position.

Are the cornering lamps OFF?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

1. Determine which cornering lamp is ON.
2. Disconnect the turn signal switch.

Does the cornering lamp turn OFF.

Go to Step 5

Go to Step 4

Repair a short to battery voltage in the supply voltage circuit of the cornering lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.

Did you complete the repair?

Go to Step 6

--

Replace the turn signal switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column -Tilt.

Did you complete the repair?

Go to Step 6

--

1. Connect all connectors and components that were previously disconnected.
2. Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2