GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2001 🢒 Regal (China) 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Pump Pulley Replacement

Tools Required

    • J 25033-C Power Steering Pump Pulley Installer
    • J 37609-A Power Steering Pump Pulley Remover

Removal Procedure
  1. Remove the accessory drive belt. Refer to Drive Belt Replacement
  2. Remove the power steering pump from the engine for clearance. Refer to Power Steering Pump Replacement .

    3. Object Number: 293353 Size: SH
  3. Using J 37609-A remove the power steering pump pulley from the power steering pump.

Installation Procedure

    Object Number: 293353 Size: SH

    Important: 

       • Never use a hammer to install the power steering pulley.
       • The face of the power steering pulley hub must be flush with the end of the power steering pump driveshaft.

  1. Using J 25033-C install the power steering pump pulley to the power steering pump.
  2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement .
  3. Install the accessory drive belt. Refer to Drive Belt Replacement .
  4. Fill the power steering system. Refer to Checking and Adding Power Steering Fluid
  5. Bleed the power steering system. Refer to Power Steering System Bleeding .
  6. Inspect the power steering system for leaks. Refer to Power Steering Fluid Leaks .