| Table 1: | Ignition Key Can Be Turned to the Locked Position with the Transaxle Out of Park |
| Table 2: | Ignition Key Cannot Turn to the Lock Position with the Transaxle in the Park Position |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 |
Does the test lamp illuminate? | -- | ||
2 |
Does the test lamp illuminate? | -- | ||
3 | Replace the steering column electric park lock Refer to Electric Park Lock Module - Disassemble - Off Vehicle and Electric Park Lock Module - Assemble - Off Vehicle for service procedure. Is the repair complete? | -- | -- | |
4 | Repair a short to B+ in circuit 1134. Is the repair complete? | -- | -- | |
5 | Replace the automatic transaxle control (BTSI). Refer to Automatic Transmission Shift Lock Control Disassemble - Off Vehicle in Automatic Transaxle-4T65-E for service procedure. Is the repair complete? | -- | -- | |
6 | Verify that the system operates properly. Does the system operate properly? | -- | System OK |
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Check the PARK LOCK fuse for an open. Is the PARK LOCK fuse open? | -- | ||
2 | Disconnect connector C 201. Use a test lamp, connected to B+, to probe connector C 201 terminal D3. Does the test lamp light? | -- | ||
3 | Disconnect the automatic transaxle control. Use a test lamp, connected to B+, to probe the automatic transaxle control connector terminal F. Does the test lamp light? | -- | ||
4 | Locate and repair a short to ground in circuit 1600 (PPL). Is the repair complete? | -- | -- | |
5 | Use a test lamp, connected to B+, to probe the automatic transaxle control connector terminal C. Does the test lamp light? | -- | ||
6 | Locate and repair a short to ground in circuit 1134 (LT BLU). Is the repair complete? | -- | -- | |
7 |
Does the test lamp illuminate? | -- | ||
8 | Using a test lamp, connect between the automatic transaxle control (BTSI) connector terminal C circuit 1134 and ground. Does the test lamp illuminate? | -- | ||
9 | Using a test lamp, connect between the steering column electric park lock connector terminal A circuit 1134 and ground. Does the test lamp illuminate? | -- | ||
10 | Using a test lamp, connect between the steering column electric park lock connector terminal A circuit 1134 and terminal B circuit 1450. Does the test lamp illuminate? | -- | ||
11 | Repair poor connection or open in circuit 1600. Is the repair complete? | -- | -- | |
12 | Repair poor connection or open in circuit 1134. Is the repair complete? | -- | -- | |
13 | Repair an open in circuit 1450. Is the repair complete? | -- | -- | |
14 | Replace the automatic transaxle control (BTSI). Refer to Automatic Transmission Shift Lock Control Disassemble - Off Vehicle for service procedure. Is the repair complete? | -- | -- | |
15 | Replace the steering column electric park lock Refer to Electric Park Lock Module - Disassemble - Off Vehicle and Electric Park Lock Module - Assemble - Off Vehicle for service procedure. Is the repair complete? | -- | -- | |
16 | Verify that the system operates properly. Does the system operate properly? | -- | System OK |
