Did you perform the Automatic Door Locks System Check?

--

Go to Step 2

Go to Power Door Locks System Check

1. Turn the ignition switch to the LOCK position.
2. Connect a test light between the door lock switch terminals:

•	The drivers side door lock switch, terminals B and B+.

•	The passengers side door lock switch, terminals C and B+.

3. Press the unlock on the inoperative door lock switch while observing the J 39200 Digital Multimeter (DMM).

Does the test light illuminate?

--

Go to Step 3

Go to Step 4

Repair a poor connection or open in CKT 781.

Has the repair been made?

--

Go to Step 5

--

Replace the door lock switch. Refer to Door Inside Handle Bezel Replacement .

Has the repair been made?

--

Go to Step 5

--

1. Turn the ignition switch to the LOCK position.
2. Reconnect the connectors.
3. Reinstall the components.

Have all the repairs been made?

--

Go to Power Door Locks System Check

--