Step
| Action
| Value(s)
| Yes
| No
|
1
| Did
you perform the instrument cluster diagnostic system check?
| --
| Go to
Step 2
| Go to
Diagnostic System Check - Instrument Cluster
|
2
|
- Turn the ignition switch to the OFF position.
- Disconnect the brake fluid level indicator switch.
- Turn the ignition switch to the RUN position.
Does the BRAKE indicator still light?
| --
| Go to
Step 4
| Go to
Step 3
|
3
|
- Replace the brake fluid level indicator switch. Refer to
Brake Fluid Level Indicator Switch Replacement
in Hydraulic Brakes.
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
4
|
- Turn the ignition switch to the OFF position.
- Disconnect the Electronic Brake Control/Electronic Brake Traction
Control Module (EBCM/EBTCM).
- Turn the ignition switch to the RUN position.
Does the BRAKE indicator still light?
| --
| Go to
Step 6
| Go to
Step 5
|
5
|
- Replace the Electronic Brake Control/Electronic Brake Traction
Control Module (EBCM/EBTCM). Refer to
Electronic Brake and Traction Control Module Replacement
in Antilock Brake System (ABS) and Enhanced Traction
System (ETS).
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
6
|
- Inspect for a short to ground on CKT 209.
- Inspect the system.
Is the repair complete?
| --
| System OK
| --
|
