J 34730-1A Fuel Pressure Gauge

1. Turn OFF the ignition.



2. Remove the injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical.

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

3. Disconnect the negative battery cable.
4. Loosen the fuel filler cap to relieve tank vapor pressure.



5. Connect Fuel Pressure Gauge J 34730-1A to the fuel pressure connection. Wrap a shop towel around the fuel pressure connection while connecting the fuel pressure gauge in order to avoid spillage.
6. Install the bleed hose into an approved container and open the valve to bleed the fuel system pressure. The fuel connections are now safe for servicing.
7. Drain any fuel remaining in the fuel pressure gauge into an approved container.