Drive Belt Idler Pulley Replacement VIN 1 - Upper

1. Remove the supercharger drive belt. Refer to Accessory Drive Belts Replacement



2. Remove the drive belt idler pulley bolt.
3. Remove the drive belt idler pulley.

1. Install the drive belt idler pulley.
2. Install the drive belt idler pulley bolt.

Tighten
Tighten the bolt to 50 N·m (37 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




3. Install the supercharger drive belt. Refer to Accessory Drive Belts Replacement

Drive Belt Idler Pulley Replacement VIN 1 - Lower

1. Remove the supercharger drive belt.



2. Remove the drive belt idler pulley bolt.
3. Remove the drive belt idler pulley.

1. Install the drive belt idler pulley.
2. Install the drive belt idler pulley bolt.

Tighten
Tighten the bolt to 50 N·m (37 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




3. Install the supercharger drive belt.