GM Service Manual Online
For 1990-2009 cars only

The main instrument panel fuse block is located under the instrument panel, on the passenger's side of the vehicle. Lamps, connectors and the HVAC duct temperature sensors may need to be disconnected and removed to allow access to this fuse block.

Remove the hush panel on the passenger's side to reveal the fuses by performing the following steps:

  1. Remove the two screws located along the front edge of the panel.
  2. Lower the hush panel.
  3. Remove the fuse block cover.
  4. Place the wide end of the fuse puller over the plastic end of the fuse.
  5. Squeeze the ends over the fuse and pull it out.

When finished, reinstall the fuse block cover and the hush panel. Reinstall lamps, connectors and HVAC duct temperature sensors if they were removed.


Object Number: 810938  Size: B4

Fuses

Usage

SBM

Interior Lamps

PDM

PDM Module

A/C

HVAC Motor, HVAC Mix Motors

IGN SEN

Auto Dimming Mirror, Driver HTS Seat, Rear Defog Relay, MEM Module, Cool LVL Sensor, Passenger Heated Seat

ELC

HVAC Flat Pk Mtrs, Electronic Level Control Sensor, Electronic Level Control Sensor (Rear Fuse Block)

ABS

Anti-Lock Brake System Module

HVAC

HVAC Main Con Head,

HVAC Programmer, Instrument Panel Cluster

CR CONT

Stepper Motor Cruise, Cruise Switch

HUD

Head-Up Display Switch, Head-Up Display

CSTR/SBM

HVAC Programmer, Instrument Panel Cluster, SBM (275 to LCM) (1135 to BTSI SL)

LP PK L

Underhood Lamp, Left Park/Sidemarker, Left Park/Turn Lamp, SBM, Left Tail Signal Lamp, Left Tail/Stoplamp, Left Rear Sidemarker

LP PK R

Right Park/Sidemarker Lamp, Right Park/Turn Lamp, Right Tail/Sign Lamp, Right Tail/Stoplamp, Right Rear Sidemarker, Stop/Taillamp, Tail/Signal Lamp, License Lamp, RFA

RUN

Run/Accessory

WSW

Wiper Motor

Blank

Not Used

WSW/RFA

Wiper Switch, RFA, Rain Sense

B/U LP

Auto Dimming Mirror, Back-Up Lamps