GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 Park Avenue 🢒 HVAC 🢒 Heating, Ventilation and Air Conditioning 🢒 Windshield Defroster Duct Replacement

Removal Procedure
  1. Remove the instrument panel (I/P) assembly. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gages, and Console.

    2. Object Number: 247125 Size: SH
  2. Remove the defroster duct retaining screws and nut.
  3. Remove the defroster duct.

Installation Procedure

    Object Number: 247125 Size: SH
  1. Install the defroster duct.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the defroster duct screws.

    3. Tighten
    Tighten the screws to 2.3 N·m (23 lb in).

  3. Install the defroster duct mounting nut to the front of dash.

    4. Tighten
    Tighten the nut to 9 N·m (80 lb in).

  4. Install the I/P assembly. Refer to Instrument Panel Assembly Replacement in Instrument Panel, Gages, and Console.