Tools Required

J 22610 Keystone Clamp Plier

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
3. Remove the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement .



4. Remove the hex jam nut (2) from the inner tie rod.



5. Remove the tie rod end clamp (2) from the rack and pinion boot (1).
6. Remove the rack and pinion boot clamp from the rack and pinion boot.



7. Remove the rack and pinion boot (1) from the steering gear.

1. Install the rack and pinion boot (3) to the steering gear.
2. Install a new rack and pinion boot clamp.
3. Using J 22610 crimp the rack and pinion boot clamp.



4. Install the tie rod end clamp (2) to the rack and pinion boot (1).



5. Install the hex jam nut (2) to the inner tie rod assembly.
6. Install the outer tie rod. Refer to Rack and Pinion Outer Tie Rod End Replacement .
7. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
8. Lower the vehicle.
9. Adjust the toe alignment. Refer to Front Toe Adjustment in Wheel Alignment.