For 1990-2009 cars only
Removal Procedure
- Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.
- Remove the transaxle vent (press fit) (37) by pulling upward with pliers, gripping the ring edge at transmission surface.
Installation Procedure
- Install the transaxle vent (press fit) (37) by tapping gently around ring edge with a drift until vent ring is flush with trasmission case.
- Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.
