Schematic Reference: Interior Lights Schematics

Connector End View Reference: Master Electrical Component List in Wiring Systems

1

Did you perform the Lighting Systems Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

1. Close all of the doors.
2. Turn OFF the courtesy lamp switch.
3. Turn ON the ignition, with the engine OFF.
4. Turn ON and OFF the reading lamps.

Do the reading lamps operate properly?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Does the courtesy lamp function of the always on reading lamp operate properly?

Go to Step 4

Go to Courtesy Lamps Always On

Inspect for poor connections at the harness connector of the reading lamp switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 6

Go to Step 5

Replace the always on reading lamp switch.

Did you complete the replacement?

Go to Step 6

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2