Removal Procedure
- Turn the ignition OFF.
- Remove the negative battery cable. Refer to
Battery Cable Replacement
.
- Remove the underhood Bussed Electrical Center (BEC) cover (1).
- Remove the Low Speed (1), High Speed
(2), or Series Parallel (3) Cooling Fan Relay from the underhood Bussed Electrical
Center (BEC).
Installation Procedure
- Install the Low Speed (1),
High Speed (2), or Series Parallel (3) Cooling Fan Relay into the underhood
Bussed Electrical Center (BEC).
- Install the underhood Bussed Electrical
Center (BEC) cover (1).
- Install the negative battery cable. Refer to
Battery Cable Replacement
.