For 1990-2009 cars only
Removal Procedure
- Remove the center pillar trim panel.
- Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Disengage the front sill plate retainers by pulling upward.
- Disengage the rear sill plate by pulling upward.
- Remove the weatherstrip (1).
Remove the rear sill plate.
Installation Procedure
- Line up the locating mark. Start at the upper corner of the B-pillar.
- Push the weatherstrip (1) onto the pinchweld. Work downward from the corner and continue around the entire opening.
- Ensure that the weatherstrip (1) is seated around the entire opening.
- Install the rear sill plate.
- Engage the front sill plate retainers by pushing downward.
- Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
- Install the center pillar trim panel. Refer to Center Pillar Garnish Molding Replacement in Interior Trim.
Important:
• The single blue line on the weatherstrip is for the right side
of the vehicle. • The double blue line on the weatherstrip is for the left side
of the vehicle.
Fasten the sill plate by pushing downward.
