Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Power Door Locks System Check? | -- | Go to Step 2 | |
2 |
Does the voltage measure within the specific range? | 10-15 V | Go to Step 3 | Go to Step 10 |
3 |
Does the voltage measure within the specified range? | 10-15 V | Go to Step 4 | Go to Step 13 |
4 |
Does the voltage measure within the specified range? | 10-15 V | Go to Step 5 | Go to Step 14 |
5 |
Does the voltage measure within the specified range? | 10-15 V | Go to Step 6 | Go to Step 15 |
6 | Has the RFA module been replaced? | -- | Go to Step 7 | Go to Step 8 |
7 | Has the DDM been replaced? | -- | Go to Power Door Locks Switch Lock Function Inoperative - One | Go to Step 9 |
8 | Replace the RFA module. Refer to Remote Control Door Lock Receiver Replacement in Keyless Entry. Is the repair complete? | -- | -- | |
9 | Replace the DDM. Refer to Front Door Module Replacement . Is the repair complete? | -- | -- | |
10 | Use a DMM in order to measure the resistance at DDM connector C2, terminal D and ground. Does the resistance measure within the specified range? | 0-5 ohms | Go to Step 12 | Go to Step 11 |
11 | Repair the open in CKT 350 (BLK). Refer to Wiring Repairs in Wiring Systems. Is the repair complete. | -- | -- | |
12 | Repair the open in CKT 742 (RED). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
13 | Repair the open in CKT 39 (PNK). Refer to Wiring Repairs . Is the repair complete? | -- | -- | |
14 | Repair the open in CKT 2040 (ORN). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- | |
15 | Repair the open in CKT 443 (YEL). Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | -- |
