Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Power Door Locks System Check? | -- | Go to Step 2 | |||||||||
2 | Measure the voltage at the malfunctioning door lock actuator harness connector between terminal A and terminal B while operating the power door lock switch. Is the voltage within the specified range? | 10-15 V | Go to Step 3 | Go to Step 4 | ||||||||
3 | Replace the malfunctioning door lock actuator. Refer to Door Lock Actuator Replacement . Did you complete the repair? | -- | -- | |||||||||
4 | Measure the resistance between the malfunctioning door lock actuator harness connector terminal A and each of the following terminals:
Is the resistance within the specified range? | 0-5 ohms | Go to Step 6 | Go to Step 5 | ||||||||
5 | Repair an open in any of the following circuits. Refer to Wiring Repairs in Wiring Systems.
Did you complete the repair? | -- | -- | |||||||||
6 | Measure the resistance between the inoperative door lock actuator harness connector terminal B and each of the following terminals:
Is the resistance within the specified range? | 0-5 ohms | Go to Step 8 | Go to Step 7 | ||||||||
7 | Repair an open in any of the following circuits. Refer to Wiring Repairs in Wiring Systems.
Did you complete the repair? | -- | -- | |||||||||
8 | Replace the door module at the malfunctioning door. Refer to one of the following procedures: Did you complete the repair? | -- | -- |
