DEFINITION: All of the power windows are inoperative from all of the door window switches.

Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Remove the PWR WDO circuit breaker.
2. Use a digital multimeter (DMM) in order to measure the resistance between the fuse terminals.

Is the resistance within the specified range?

0-5 ohms

Go to Step 4

Go to Step 3

Replace the PWR WDO circuit breaker.

Did you complete the repair?

--

Go to Power Windows System Check

--

Measure the voltage at the underhood MaxiFuse® block PWR WDO circuit breaker terminal A5 and ground.

Is the voltage within the specified range?

10-15 V

Go to Step 5

Go to Power Distribution Schematics in Wiring Systems

Repair an open or a high resistance in CKT 742 at the underhood MaxiFuse® block. Refer to Wiring Repairs

Did you complete the repair?

--

Go to Power Windows System Check

--