Removal Procedure
- Remove the switch assembly from the trim
panel by completing the following steps:
1.1. | Unsnap the front tab using a thin-bladed tool. |
1.2. | Lift the switch assembly up and out of the vehicle. |
- Disconnect the electrical connector.
- Remove the switch from the bezel by releasing the tabs.
Installation Procedure
- Snap the switch into the bezel.
- Connect the electrical connector.
- Install the rear tab into the trim panel by completing the following
steps:
3.1. | Press the rear tab down. |
3.2. | Snap the front tab into position in order to secure to the trim
panel. |