GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Park Avenue 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Open Assist Rod Replacement

Removal Procedure

    Object Number: 256006 Size: SH
  1. Remove the release clip retaining the assist rod to the mounting stud (2).

    2. Object Number: 256003 Size: SH
  2. Remove the assist rod (2) from the hood (1).

    3. Object Number: 256006 Size: SH
  3. Remove the assist rod mounting stud (2) from the hood (1).

Installation Procedure

    Object Number: 256006 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the assist rod mounting stud (2) to the hood (1).

    2. Tighten
    Tighten the stud to 11 N·m (93 lb in).


    Object Number: 256003 Size: SH
  2. Install the clip to the assist rod (2).
  3. Install the assist rod (2) to the hood (1).