Did you perform the Instrument Cluster Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Instrument Cluster

1. Turn the ignition switch to RUN.
2. Connect the scan tool.
3. Select the Instrument Cluster Inputs menu.
4. Examine the scan tool input data for the VOLTS indicator.

Does the VOLTS indicator input data match the scan tool indicator input?

--

Go to Starting System Check and Charging System Check in Engine Electrical

Go to Step 3

Replace the instrument cluster (IPC). Refer to Instrument Cluster Replacement .

Did you complete the repair?

--

Go to Instrument Cluster System Check

--