GM Service Manual Online
For 1990-2009 cars only

Console Trim Plate Replacement Front

Removal Procedure


    Object Number: 428179  Size: SH
  1. Pull outward on the front trim panel (1) in order to release the retaining clips.

  2. Object Number: 428190  Size: SH
  3. Disconnect the electrical connector (1).
  4. Remove the trim panel.

Installation Procedure


    Object Number: 428190  Size: SH
  1. Connect the electrical connector (1).
  2. Align the retaining clips (2) on the trim panel with the console.
  3. Push inward in order to secure the retaining clips (2).

Console Trim Plate Replacement Rear

Removal Procedure


    Object Number: 428193  Size: SH
  1. Partially remove the rear console panel in order to allow access to the rear air deflector control linkage.
  2. Pull rearward on the rear console panel in order to disengage the retainers (1).


    Object Number: 428196  Size: SH
  3. Use a flat bladed tool in order to release the rear air deflector control linkage.
  4. Remove the rear trim panel.
  5. Remove the air deflectors from the rear trim panel by pulling outward. This allows for access to the rear air deflector control linkage on installation.

Installation Procedure


    Object Number: 428193  Size: SH
  1. Align the rear console trim panel to the console.
  2. Push inward in order to engage the retainers (1).


    Object Number: 428196  Size: SH
  3. Through the air deflector openings, fasten the rear air deflector control linkage to the control knob.
  4. Install the air deflectors.