GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the overhead console. Refer to Compartment and UGDO Replacement - Overhead in Interior Trim.
  2. Disconnect the microphone electrical connector.
  3. Remove the foam from on top of the microphone.
  4. Remove the 2 screws.
  5. Remove the microphone from the overhead console.

Installation Procedure

  1. Install the microphone.
  2. Install the screws.
  3. Install the foam sound pad over the microphone.
  4. Connect the electrical connector.
  5. Install the overhead console. Refer to Compartment and UGDO Replacement - Overhead in Interior Trim.