GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Park Avenue 🢒 Body and Accessories 🢒 Wipers/Washer Systems 🢒 Windshield Wiper Motor Cover Replacement

Removal Procedure

    Object Number: 537228 Size: SH
  1. Remove the harness connector from the wiper motor cover.
  2. Remove three screws and the wiper motor cover from the wiper motor assembly.

Installation Procedure

    Object Number: 537228 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the wiper motor cover on the wiper motor assembly with three screws.

    2. Tighten
    Tighten the screws to 3 N·m (26 lb in).

  2. Connect the harness connector to the wiper motor cover.