Tools Required

J 37097-A Heater Hose Clamp Tool

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.
2. Drain the coolant. Refer to Cooling System Draining and Filling .
3. Remove the right cooling fan.



4. Remove the outlet radiator hose clamp from the engine.
5. Remove the outlet raditor hose from the engine.



6. Remove the outlet radiator hose clamp from the radiator.
7. Remove the outlet radiator hose from the radiator.

Tools Required

J 37097-A Heater Hose Clamp Tool

1. Install the outlet radiator hose to the radiator.
2. Install the outlet radiator hose clamp to the radiator.



3. Install the outlet radiator hose to the engine.
4. Install the outlet raditor hose clamp to the engine.
5. Install the right cooling fan.
6. Fill the cooling system. Refer to Cooling System Draining and Filling .
7. Start the engine and checks for leaks.