1. Remove the crankshaft balancer and the bolt. Refer to Crankshaft Balancer Replacement .




Important: Do not damage the seal bore or the contact surfaces.

2. Use a screwdriver in order to pry out the oil seal.

Tools Required

J 35354 Seal Installer

1. Use the J 35354 in order to install the oil seal.
2. Use the crankshaft balancer bolt with the tool.
3. Tighten the bolt until the seal is seated in the cover.
4. Remove the J 35354 .
5. Coat the inside seal surface of the crankshaft balancer with lubricant GM P/N 10522497 or the equivalent.
6. Install the crankshaft balancer and the bolt. Refer to Crankshaft Balancer Replacement .