SMU-SECTION 3A-REVISED FRONT SUM TOE ALIGNMENT

SUBJECT: SERVICE MANUAL UPDATE - SECTION 3A - REVISED FRONT SUM TOE ALIGNMENT SPECIFICATION

MODELS: 1997 BUICK PARK AVENUE

THIS BULLETIN IS BEING ISSUED TO REVISE THE ALIGNMENT SPECIFICATION FOR THE FRONT SUM TOE SPECIFICATION IN SECTION 3A OF THE SERVICE MANUAL.

THE FRONT SUM TOE IS CURRENTLY LISTED AT .2 +/- 3 DEGREES. THE CORRECT FRONT SUM TOE SPECIFICATION SHOULD BE .2 +/- .2 DEGREES.

PLEASE UPDATE THE SERVICE MANUAL WITH THE ABOVE REVISED INFORMATION.

FIGURES: 00 ATTACHMENTS: 00

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1997 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.