GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2005 🢒 LeSabre 🢒 Brakes 🢒 Antilock Brake System 🢒 Vehicle Yaw Sensor Replacement

Removal Procedure

    Object Number: 492697 Size: SH
  1. Turn OFF the ignition.
  2. Remove the rear compartment front trim panel. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
  3. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  4. Remove the 2  yaw rate sensor mounting nuts (1).
  5. Remove the yaw rate sensor (2).
  6. Disconnect the yaw rate sensor electrical connector (3).

Installation Procedure

    Object Number: 492697 Size: SH
  1. Install the yaw rate sensor electrical connector (3).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the yaw rate sensor (2).

    3. Tighten
    Tighten the 2  yaw rate sensor mounting nuts (1) to 6 N·m (53 lb in).

  3. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  4. Install the rear compartment front trim panel. Refer to Rear Compartment Trim Panel Replacement in Body Rear End.
  5. Perform the ABS Diagnostic System Check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.