| Table 1: | Driver Door Module (DDM) |
| Table 2: | Head Up Display (HUD) |
| Table 3: | Instrument Panel Cluster (IPC) |
| Table 4: | Instrument Panel Module (IPM) |
| Table 5: | Powertrain Control Module (PCM) |
The scan tool data lists contain all the instrument panel, gauges, and console related parameters that are available on the scan tool. The parameters in the list are arranged in alphabetical order. The data list column indicates the location of the parameter within the scan tool menu selections.
Use the scan tool data lists as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with the Diagnostic System Check - Vehicle in Vehicle DTC Information.
Use the scan tool data lists only after the following is determined:
| • | There is no published DTC procedure nor published symptom procedure for the customer concern. |
| • | The DTC or symptom procedure indicated by the diagnostic system check does not resolve the customer concern. |
The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Doors Closed | |||
Driver Door Ajar Sw. | Inputs | On/Off | Off |
Driver Door Jamb Sw. | Inputs | On/Off | Off |
Left Rear Door Ajar Sw. | Inputs | On/Off | Off |
Left Rear Door Jamb Sw. | Inputs | On/Off | Off |
Passenger Door Ajar Sw. | Inputs | On/Off | Off |
Passenger Door Jamb Sw. | Inputs | On/Off | Off |
Right Rear Door Ajar Sw. | Inputs | On/Off | Off |
Right Rear Door Jamb Sw. | Inputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Buckled/High Beams Off/Park Brake Unapplied | |||
Check Gages Lamp | Inputs | On/Off | Off |
English/Metric Status | Inputs | English/ Metric | English |
High Beam Switch | Inputs | On/Off | Off |
Ignition 3 | Inputs | On/Off | On |
Ignition Counter | Data | -- | Varies |
Ignition Voltage | Data | Volts | 12.2 V Varies |
Lt. Turning Signal Sw. | Inputs | On/Off | Off |
Outside Status | Inputs | Day/Night | Varies |
PROM ID | Module Information 1 | -- | Varies |
Rt. Turning Signal Sw. | Inputs | On/Off | Off |
Vehicle Speed | Inputs | km/h (mph) | 0 (mph) 0 km/h |
VF Dim | Data | Volts | Varies |
Year Module Built | Module Information 1 | -- | Varies |
8 Digit GM Part Number | Module Information 2 | -- | Varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON/Engine OFF/Seat Belt Unbuckled/High Beams Off/Park Brake Unapplied | |||
Air Bag Lamp | Outputs | On/Off | Off |
Antilock Discrete | Inputs - Base IPC Inputs - Uplevel IPC | On/Off | Off |
Antilock Lamp | Outputs | On/Off | Off |
Battery Voltage | Data | Volts | 12.2 V (varies) |
Brake Lamp | Outputs | On/Off | Off |
Cruise Lamp | Outputs | On/Off | Off |
Display Fuel Switch | Inputs - Uplevel IPC | On/Off | Off |
Display Gauge Switch | Inputs - Uplevel IPC | On/Off | Off |
English/Metric Sw | Inputs - Base IPC Inputs - Uplevel IPC | Active/Inactive | Inactive |
Engine Speed | Data | RPM | 0 RPM |
Fasten Seat Belts | Outputs | On/Off | Off |
High Beam Lamp | Outputs | On/Off | Off |
Hot Temp. Lamp | Outputs | On/Off | Off |
Ignition 1 | Inputs - Base IPC Inputs - Uplevel IPC | On/Off | On |
Ignition Counter | Data | -- | Varies |
km/h (MPH Export) Lamp | Outputs | On/Off | Off |
Low Brake Fluid | Inputs - Base IPC Inputs - Uplevel IPC | On/Off | Off |
Low Coolant Level | Inputs - Uplevel IPC | On/Off | Off |
Low Fuel Lamp | Outputs | On/Off | Off |
Lt. Turning Signal Sw. | Inputs - Base IPC Inputs - Uplevel IPC | On/Off | Off |
mph (km/h Export) Lamp | Outputs | On/Off | On |
Odo/Trip Switch | Inputs - Uplevel IPC | On/Off | Off |
Oil Pressure Lamp | Outputs | On/Off | Off |
Park Brake Switch | Inputs - Base IPC Inputs - Uplevel IPC | On/Off | Off |
PROM ID | Module Information | -- | Varies |
Reset Switch | Inputs - Uplevel IPC | On/Off | Off |
Rt. Turning Signal Sw. | Inputs - Base IPC Inputs - Uplevel IPC | On/Off | Off |
Serial Number | Module Information | -- | Varies |
Service Veh. Soon Lamp | Outputs | On/Off | Off |
Theft System Lamp | Outputs | On/Off | Off |
Traction Off Lamp | Outputs | On/Off | Off |
Trip Reset Switch | Inputs - Base IPC | On/Off | Off |
Vehicle Speed | Data | km/h (mph) | 0 km/h (mph) |
Volt Lamp | Outputs | On/Off | Off |
Washer Fluid Level | Inputs - Uplevel IPC | On/Off | Off |
Year Module Built | Module Information | -- | Varies |
8 Digit GM Part Number | Module Information | -- | Varies |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Key in Ignition/Ignition On | |||
Key In Ignition | Non - HVAC Data | Yes/No | Yes |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Engine Idling/Normal Operating Temperature | |||
ECT Sensor | Engine Data 1 Engine Data 2 EVAP | Celsius (Fahrenheit) | 85-105°C (185-220°F) |
Engine Oil Level Switch | Engine Data 2 | Ok/Low | Ok |
Engine Oil Life Remaining | Engine Data 2 | Percent | 0-100% (varies) |
Engine Oil Pressure Sen | Engine Data 2 | Volts | 2.20 V |
Engine Speed | Engine Data 1 Engine Data 2 EVAP | RPM | ±100 RPM from Desired Idle Speed |
Fuel Tank Level Remaining | EVAP | Percent | 0-100% (varies) |
Vehicle Speed Sensor | Engine Data 1 Engine Data 2 EVAP | Miles per hour (Kilometers per hour) | 0 mph (0 km/h) |
