GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the right accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side .

  2. Object Number: 492252  Size: SH
  3. Remove the IP center trim panel (1). Refer to Instrument Panel Center Trim Panel Replacement .
  4. Remove the knee bolster. Refer to Knee Bolster Replacement .
  5. Remove the IP compartment bin (3) from above the ashtray (2) by pulling the assembly rearward in order to disengage the clips from the IP.

Installation Procedure


    Object Number: 492252  Size: SH
  1. Install the IP compartment bin assembly (3) above the ashtray (2) by aligning the tabs and pushing the assembly back into the IP in order to engage the clips.
  2. Install the IP center trim panel (1). Refer to Instrument Panel Center Trim Panel Replacement .
  3. Install the right accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Right Side .
  4. Install the knee bolster. Refer to Knee Bolster Replacement .