Schematic Reference: Interior Lights Schematics

Connector End View Reference: Master Electrical Component List in Wiring Systems

1

Did you perform the Diagnostic System Check - Vehicle?

Go to Step 2

Go to Diagnostic System Check - Vehicle in Vehicle DTC Information

1. Cover the sunload sensor assembly.
2. Turn ON the courtesy lamps.
3. Open and close the instrument panel (I/P) compartment.
4. Observe the I/P compartment lamp.

Does the I/P compartment lamp operate properly?

Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems

Go to Step 3

Inspect for poor connections at the harness connector of the I/P compartment lamp and switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.

Did you find and correct the condition?

Go to Step 5

Go to Step 4

Replace the I/P compartment lamp and switch. Refer to Instrument Panel Compartment Lamp Switch Replacement

Did you complete the replacement?

Go to Step 5

--

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2