Your vehicle may have a traction control system that limits wheel spin. This is especially useful in slippery road conditions. The system operates only if it senses that one or both of the front wheels are spinning or beginning to lose traction. When this happens, the system works the front brakes and reduces engine power to limit wheel spin.
You may feel or hear the system working, but this is normal.
If your vehicle is in cruise control when the traction control system begins to limit wheel spin, the cruise control will automatically disengage. When road conditions allow you to safely use it again, you may reengage the cruise control. See "Cruise Control" under Turn Signal/Multifunction Lever .
This light should come on briefly when you start the engine. If it stays on or comes on while you are driving, there is a problem with your traction control system.
See Traction Control System (TCS) Warning Light . When this warning light is on, the system will not limit wheel spin. Adjust your driving accordingly.
The traction control system automatically comes on whenever you start your vehicle. To limit wheel spin, especially in slippery road conditions, you should always leave the system on. But you can turn the traction control system off if you ever need to. You should turn the system off if your vehicle ever gets stuck in sand, mud or snow and rocking the vehicle is required. See "Rocking Your Vehicle To Get It Out" under If Your Vehicle is Stuck in Sand, Mud, Ice, or Snow .
To turn the system off, press the TRACTION OFF button located at the end of the shift lever on the right side of the steering wheel.
The traction control system warning light will come on and stay on. If the system is limiting wheel spin when you press the button, the warning light will come on -- but the system will not turn off right away. It will wait until there is no longer a current need to limit wheel spin.
You can turn the system back on at any time by pressing the button again. The traction control system warning light should go off.
