For 1990-2009 cars only
8-Digit GM Part Number: The scan tool displays an 8-digit numeric
number. The part number of the module.
Amplifier: The scan tool displays Connected/ Not Connected.
Antenna Signal: The scan tool displays 0-300 dBuV.
Band Number: The scan tool displays AM / FM1 / FM2. The current band that the radio is in.
Battery Voltage: The scan tool displays 0-25.5 volts. The voltage measured from the modules battery positive voltage circuit to the modules ground circuit.
Calibration ID: The scan tool displays 0-9999. The number designating what calibrations the module contains.
Cassette Cut Tape: The scan tool displays 0-999. The number of cut tape errors the radio has recorded
Cassette Inserted: The scan tool displays Yes/No. The scan tool displays Yes when a cassette is inserted.
Cass. Load/Unload Errors: The scan tool displays 0-999. The number of cassette loading and unloading errors the radio has recorded.
Cassette Metal: The scan tool displays Metal/Not Metal. The scan tool displays Metal when a metal cassette is inserted.
Cassette Side: The scan tool displays Bottom/Top. This indicates which side of the tape is being played.
Cassette Tight Tape: The scan tool displays 0-999. The number of cassette tight tape errors the radio has recorded.
CD Changer: The scan tool displays Connected/Not Connected. The scan tool displays Connected when a CD changer is connected.
CD Focus Errors: The scan tool displays 0-999. The number of CD focus errors recorded.
CD Load/Unload Errors: The scan tool displays 0-999. The number of CD loading and unloading errors recorded.
CD Tracking Errors: The scan tool displays 0-999. The number of CD tracking errors recorded.
Componet Serial Number: The scan tool displays the serial number of the module.
Component Serial # 8-11: The scan tool displays 0-9999. The first partition of the serial number.
Component Serial # 12: The scan tool displays 0-9. The second partition of the serial number.
Day: The scan tool displays the day the software was created.
Digital Radio Antenna: This parameter indicates the amount of current being used by the digital radio antenna by measuring the voltage drop across an internal resistor. Early design modules support the mV reading while later design modules support a mA reading.
Driver Number: The scan tool displays Driver 1-2. The memory position the driver has selected as received by Class 2 lines.
Ignition Counter: The scan tool displays the number of ignition cycles.
Month: The scan tool displays the month the software was created.
New VIN Counter: The scan tool displays 0-9. The number of times a new VIN number has been set in the radio.
Phone: The scan tool displays Present or Not Present. The scan tool displays Present when the radio receives class 2 information from the phone module.
Power Mode: The scan tool displays what power mode the module is in.
Preset Control: The scan tool displays a Preset 1-6 when the radio is on a preset station or Not A Preset when the radio is not on a preset.
PROM ID: The scan tool displays 0-9999. The identification number of the modules internal PROM.
Radio ID: The scan tool displays the radio ID of the digital radio receiver.
Sequence Number: The scan tool displays the sequence number in which the module was built.
Single CD Track Number: The scan tool displays 0-99. This is the current track being played.
Software Version: The scan tool displays the version of software.
Source: The scan tool displays Off/Tuner/CD/Cassette. This indicates the current source of audio. Off will be displayed when digital radio audio is the current source.
Steering Wheel Controls: The scan tool displays 0-999 counts. The signal in counts as received from the steering wheel controls.
Theft Armed: The scan tool displays Learned VIN / No VIN. The scan tool displays Learned VIN when the theft mode has been turned ON by recognizing a valid VIN.
Theft Lock: The scan tool displays Locked / Unlocked. The scan tool displays Unlocked when the radio receives the correct VIN number across class 2 lines.
Total Cassette Hours: The scan tool displays 0-999 hrs. The total number of hours the cassette player has been used.
Total CD Hours: The scan tool displays 0-999 hrs. The total number of hours the CD player has been used.
Total Radio Hours: The scan tool displays 0-999 hrs. The total number of hours the radio has been used.
Year: The scan tool displays the year the software was created.
Amplifier: The scan tool displays Connected/ Not Connected.
Antenna Signal: The scan tool displays 0-300 dBuV.
Band Number: The scan tool displays AM / FM1 / FM2. The current band that the radio is in.
Battery Voltage: The scan tool displays 0-25.5 volts. The voltage measured from the modules battery positive voltage circuit to the modules ground circuit.
Calibration ID: The scan tool displays 0-9999. The number designating what calibrations the module contains.
Cassette Cut Tape: The scan tool displays 0-999. The number of cut tape errors the radio has recorded
Cassette Inserted: The scan tool displays Yes/No. The scan tool displays Yes when a cassette is inserted.
Cass. Load/Unload Errors: The scan tool displays 0-999. The number of cassette loading and unloading errors the radio has recorded.
Cassette Metal: The scan tool displays Metal/Not Metal. The scan tool displays Metal when a metal cassette is inserted.
Cassette Side: The scan tool displays Bottom/Top. This indicates which side of the tape is being played.
Cassette Tight Tape: The scan tool displays 0-999. The number of cassette tight tape errors the radio has recorded.
CD Changer: The scan tool displays Connected/Not Connected. The scan tool displays Connected when a CD changer is connected.
CD Focus Errors: The scan tool displays 0-999. The number of CD focus errors recorded.
CD Load/Unload Errors: The scan tool displays 0-999. The number of CD loading and unloading errors recorded.
CD Tracking Errors: The scan tool displays 0-999. The number of CD tracking errors recorded.
Componet Serial Number: The scan tool displays the serial number of the module.
Component Serial # 8-11: The scan tool displays 0-9999. The first partition of the serial number.
Component Serial # 12: The scan tool displays 0-9. The second partition of the serial number.
Day: The scan tool displays the day the software was created.
Digital Radio Antenna: This parameter indicates the amount of current being used by the digital radio antenna by measuring the voltage drop across an internal resistor. Early design modules support the mV reading while later design modules support a mA reading.
Driver Number: The scan tool displays Driver 1-2. The memory position the driver has selected as received by Class 2 lines.
Ignition Counter: The scan tool displays the number of ignition cycles.
Month: The scan tool displays the month the software was created.
New VIN Counter: The scan tool displays 0-9. The number of times a new VIN number has been set in the radio.
Phone: The scan tool displays Present or Not Present. The scan tool displays Present when the radio receives class 2 information from the phone module.
Power Mode: The scan tool displays what power mode the module is in.
Preset Control: The scan tool displays a Preset 1-6 when the radio is on a preset station or Not A Preset when the radio is not on a preset.
PROM ID: The scan tool displays 0-9999. The identification number of the modules internal PROM.
Radio ID: The scan tool displays the radio ID of the digital radio receiver.
Sequence Number: The scan tool displays the sequence number in which the module was built.
Single CD Track Number: The scan tool displays 0-99. This is the current track being played.
Software Version: The scan tool displays the version of software.
Source: The scan tool displays Off/Tuner/CD/Cassette. This indicates the current source of audio. Off will be displayed when digital radio audio is the current source.
Steering Wheel Controls: The scan tool displays 0-999 counts. The signal in counts as received from the steering wheel controls.
Theft Armed: The scan tool displays Learned VIN / No VIN. The scan tool displays Learned VIN when the theft mode has been turned ON by recognizing a valid VIN.
Theft Lock: The scan tool displays Locked / Unlocked. The scan tool displays Unlocked when the radio receives the correct VIN number across class 2 lines.
Total Cassette Hours: The scan tool displays 0-999 hrs. The total number of hours the cassette player has been used.
Total CD Hours: The scan tool displays 0-999 hrs. The total number of hours the CD player has been used.
Total Radio Hours: The scan tool displays 0-999 hrs. The total number of hours the radio has been used.
Year: The scan tool displays the year the software was created.
