- Ensure that the window is in the full up position.
- Remove the door trim panel. Refer to
Rear Side Door Trim Panel Replacement
.
- Remove the water deflector. Refer to
Door Water Deflector Replacement
.
- Loosen the front run channel fasteners.
- Loosen the fasteners that retain the window to the module sash.
- Lower the glass 9 cm (3 in).
- Slide the glass forward in the sash slots.
- Raise the glass.
- Tighten the fasteners that retain the window to the module sash.
- Tighten the front run channel fasteners.
- Cycle the window up and down in order to inspect the operation.
- Install the water deflector. Refer to
Door Water Deflector Replacement
.
- Install the trim panel. Refer to
Rear Side Door Trim Panel Replacement
.