For 1990-2009 cars only
Removal Procedure
- Remove the push-pin from the center support (1).
- Remove the fasteners (2) from the socket side of the sunshade.
- Detach the sunshade from the center support (1).
- Partially pull downward on the sunshade in order to remove the sunshade from the headliner.
- Partially lower the headliner in order to disconnect the wiring harness connector (if the vehicle is equipped with a lighted vanity mirror). Refer to Headlining Trim Panel Replacement .
Installation Procedure
- Install the headliner, (if the vehicle was equipped with a lighted vanity mirror). Refer to Headlining Trim Panel Replacement .
- Carefully guide the electrical harness through the headliner opening, if equipped with a lighted vanity mirror.
- Connect the wiring harness connector.
- Install the sunshade through the openings in the headliner.
- Snap the retainer behind the headliner into place.
- Install the fasteners (2) in order to secure the sunshade to the roof.
- Install the push-pins to the center support (1).
- Check the operation of the lighted vanity mirror (if equipped).
