Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Remote Keyless Entry System Check? | -- | Go to Step 2 | |
2 | Is the remote keyless entry system inoperative from both transmitters? | -- | Go to Step 3 | Go to Step 4 |
3 | Reprogram the transmitters. Refer to Transmitter Programming. Do the transmitters now work? | -- | Go to Step 11 | Go to Step 5 |
4 |
Does the transmitter now work? | -- | Go to Step 11 | Go to Step 10 |
5 |
Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 6 |
6 | Repair the open or short to ground in CKT 1540 (ORN). Is the the repair complete? | -- | Go to Step 10 | -- |
7 | Measure the voltage between the RFA module connector terminals E16 and F16. Is the voltage within the specified range? | 10-15 V | Go to Step 9 | Go to Step 8 |
8 | Repair the open in CKT 1040 (BLK). Is the the repair complete? | -- | Go to Step 11 | -- |
9 | Replace the RFA module. Refer to Remote Control Door Lock Receiver Replacement Is the the repair complete? | -- | Go to Step 11 | -- |
10 | Replace the transmitter. Refer to Transmitter Programming Is the repair complete? | -- | Go to Step 11 | -- |
11 |
Is the repair complete? | -- | -- |
