Did you perform the entire Exterior Lights System Check?

--

Go to Step 2

Go to Exterior Lights System Check

1. Backprobe the turn/hazard switch connector C202 with a test lamp from cavity A17 (TAN) to ground.
2. Place the headlamp switch in the PARK position.

Did the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the turn/hazard switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle in Steering Wheel and Column - Tilt.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 1654 (TAN) between S282 and the turn/hazard switch. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Did you perform the entire Exterior Lights System Check?

--

Go to Step 2

Go to Exterior Lights System Check

1. Backprobe the turn/hazard switch connector C202 with a test lamp from cavity A17 (PNK) to ground.
2. Turn the ignition switch to the RUN position.

Does the test lamp light?

--

Go to Step 3

Go to Step 4

Replace the turn/hazard switch. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle and Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle in Steering Wheel and Column - Tilt.

Is the repair complete?

--

Go to Exterior Lights System Check

--

Repair the open in CKT 539 (PNK) between the turn signal flasher and the turn/hazard switch. Refer to Wiring Repairs in Wiring Systems.

Is the repair complete?

--

Go to Exterior Lights System Check

--