GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1999 🢒 LeSabre 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Underhood Lamp Replacement

Removal Procedure

    Object Number: 299830 Size: SH
  1. Disconnect the underhood lamp connector.
  2. Remove the bolts that retain the underhood lamp (1) to the hood.
  3. Remove the underhood lamp (1).

Installation Procedure

    Object Number: 299830 Size: SH
  1. Connect the connector to the underhood lamp (1).
  2. Install the underhood lamp (1).

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts in order to retain the underhood lamp (1) to the hood.

    4. Tighten
    Tighten the bolts to 3 N·m (27 lb in).