Instrument Panel Multifunction Switch Replacement Buick

1. Remove the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .



2. Remove the panel lights/twilight sentinel/traction control switch (4) fasteners.
3. Pull rearward on the switch in order to remove the switch.

1. Install the panel lights/twilight sentinel/traction control switch (4).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the switch fasteners.

Tighten
Tighten the fasteners to 1.9 N·m (17 lb in).

3. Install the IP cluster trim panel. Refer to Instrument Cluster Trim Panel Replacement .