GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1999 🢒 LeSabre 🢒 Steering 🢒 Steering Wheel and Column - Tilt 🢒 Automatic Transmission Shift Lock Control Assemble - Off Vehicle

Assembly Procedure

Tools Required

J 41352 Modular Column Holding Fixture

   • 
Object Number: 371120 Size: SH
  • Install the electrical BTSI actuactor (3) on to the steering column lower support (2) and the shift tube (1).
    •    • 
    Object Number: 324912 Size: SH
  • Adjust the electrical BTSI actuator.
    • 0.1. Pull the tab  (1) out on the block side (2) of the electrical BTSI actuator.
    0.2. Press on the adjuster block (2) to compress the internal adjuster spring to disengage the adjuster teeth. Slide the adjuster block as far away from the solenoid as possible.
    0.3. Lock in place by pushing the tab (1) back in.
    0.1. Inspect the electrical BTSI actuator.
    0.2. The electrical BTSI actuator must lock the gear shift lever when it is put into the park position.
    0.3. When the column is installed in the vehicle you will not be able to shift the gear lever out of the park position without pressing on the brake pedal. The solenoid will be energized.
       • 
    Object Number: 343711 Size: SH
  • Put the wire harness assembly into the wire harness strap (1).
    •    • 
  • Remove the column from the J 41352 .