- Install NEW valve rocker arm cover grommets and use NEW valve rocker arm cover bolts if they are
serviced with the grommet.
- Install NEW valve rocker arm cover gasket.
- Install the valve rocker arm cover.
Caution: Refer to Fastener Caution in the Preface section.
- If reusing bolts that are not fastened to the NEW grommets, apply GM P/N 12345382 (Canadian P/N 10953489) threadlocker or the equivalent to threads and install the valve rocker arm cover bolts and tighten to
10 N·m
(89 lb in).
- Install the engine mount strut upper bracket bolts (1) if applicable and
tighten the engine mount strut upper bracket bolts (1) to
50 N·m (37 lb ft)..
- Install the engine mount strut bracket and nuts (2), if applicable and tighten the engine mount strut bracket and nuts (2) to
50 N·m (37 lb ft).