GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Buick
🢒
2008
🢒
LaCrosse
🢒
Engine
🢒
Engine Controls and Fuel - 2.8L, 3.0L, 3.2L, or 3.6L
🢒 Evaporative Emission Hoses/Pipes Replacement - Chassis/Canister
Removal Procedure
Raise and support the vehicle. Refer to
Lifting and Jacking the Vehicle
.
Disconnect the evaporative emission (EVAP) purge pipe connector at the fuel filter area. Refer to
Plastic Collar Quick Connect Fitting Service
.
Disconnect the EVAP purge pipe (8) from the EVAP canister (1). Refer to
Plastic Collar Quick Connect Fitting Service
.
Remove the EVAP purge pipe (8).
Installation Procedure
Connect the EVAP purge pipe (8) to the EVAP canister. Refer to
Plastic Collar Quick Connect Fitting Service
.
Connect the EVAP purge pipe at the fuel filter area. Refer to
Plastic Collar Quick Connect Fitting Service
.
Lower the vehicle.