Removal Procedure
- Lower the rear of the headliner. Refer to
Headlining Trim Panel Replacement.
- Remove the antenna module bolt.
- Disconnect the antenna module electrical connector.
- Disconnect the antenna coaxial cable.
- Disconnect the rear window antenna lead from the rear window antenna connector.
- Remove the antenna module.
Installation Procedure
- Connect the rear window antenna lead to the rear window antenna connector.
- Connect the antenna coaxial cable.
- Connect the antenna module electrical connector.
Notice: Refer to Fastener Notice in the Preface section.
- Install the antenna module and the antenna module bolt.
Tighten
Tighten the bolt to 3 N·m (27 lb in).
- Install the headliner. Refer to
Headlining Trim Panel Replacement.