For 1990-2009 cars only
Removal Procedure
- Open and suitably support the hood.
- Remove the hood rear weather-strip from the flange.
- Remove the hood rear outer seals from the fenders.
- Clean the surface of the fender in the area of the hood outer seals in order to ensure proper adhesion of adhesive.
Installation Procedure
- Apply glue if you are reusing the old hood rear weather-strip.
- Install the hood rear weather-strip to the flange.
- Install the hood rear outer seals to the fenders.
- Press in order to secure the seal adhesive to the fender.
- Close the hood.
