| Table 1: | BCM Scan Tool Output Controls |
| Table 2: | IPC Scan Tool Output Controls |
| Table 3: | PCM Scan Tool Output Controls |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Chime Fast | Chime Test | The BCM activates the fast chime when you select On. The chime continues to sound until you select Off. |
Chime Medium | Chime Test | The BCM activates the medium chime when you select On. The chime continues to sound until you select Off. |
Chime Slow | Chime Test | The BCM activates the slow chime when you select On. The chime continues to sound until you select Off. |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
Coolant Gauge Sweep | Output Control | The IPC drives the coolant gauge at or above H when you select Up. The IPC drives the coolant gauge at or below C when you select Down. |
Display(s) Test | Output Control | The IPC illuminates the indicators (excluding the turn signals, high beam, and MIL) when you select On. The indicators illuminate until commanded Off. |
Fuel Gauge Sweep | Output Control | The IPC drives the fuel gauge at or above full when you select Up. The IPC drives the fuel gauge at or below empty when you select Down. |
Speedometer Gauge Sweep | Output Control | The IPC drives the speedometer at or above 140 MPH (225 km/h) when you select Up. The IPC drives the speedometer at or below 0 MPH (0 km/h) when you select Down. |
Tachometer Gauge Sweep | Output Control | The IPC drives the tachometer at or above 8000 RPM when you select Up. The IPC drives the tachometer at or below 0 RPM when you select Down. |
Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
MIL | Dash Lamps | The PCM commands the IPC to turn this lamp on and off. |
