GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2001 🢒 Century 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Hazard and Turn Signal Flasher Replacement

Removal Procedure

    Object Number: 182808 Size: SH
  1. Remove the LH instrument panel (IP) insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gages and Console.
  2. Remove the steering column filler panel. Refer to Steering Column Opening Filler Replacement in Instrument Panel, Gages and Console.
  3. Grasp the hazard and turn signal flasher and slide the flasher to the right to release the flasher tabs from the slots on the BCM bracket.
  4. Disconnect the electrical connector from the hazard and turn signal flasher.

Installation Procedure

    Object Number: 182808 Size: SH
  1. Connect the electrical connector to the hazard and turn signal flasher.
  2. Position the flasher to the BCM bracket, then slide the flasher to the left to secure the flasher tabs into the retaining slots on the bracket.
  3. Install the steering column filler panel. Refer to Steering Column Opening Filler Replacement in Instrument Panel, Gages and Console.
  4. Install the LH IP insulator. Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gages and Console.